Publikacje

Zestawienie publikacji pracowników Instytutu Mechaniki i Inżynierii Obliczeniowej Wydziału Inżynierii Mechanicznej WAT za lata 2014 – 2021 w czasopismach naukowych posiadających współczynnik wpływu Impact Factor (IF), znajdującym się w bazie Journal Citation Reports (JCR), wymienionym w części A wykazu Ministra Nauki i Szkolnictwa Wyższego.

  1. Michał Kucewicz, Paweł Baranowski, Łukasz Mazurkiewicz, Jerzy Małachowski, Comparison of selected blasting constitutive models for reproducing the dynamic fragmentation of rock, International Journal of Impact Engineering 173, 2023.
  2. Joanna Szkutnik-Rogoż, Jerzy Małachowski, Jarosław Ziółkowski, An innovative computational algorithm for modelling technical readiness coefficient: A case study in automotive industry, Computers & Industrial Engineering 176, 2023.
  3. Zakaria Titri, Belkacem Bounab, M Abderaouf Louar, Smail Khalfallah, Paweł Baranowski, Optimization of a land vehicle suspension subjected to a buried charge explosion, Proceedings of the Institution of Mechanical Engineers, Part C – Journal of Mechanical Engineering Science 237(15), 2023.
  4. Agnieszka Derewońko, Wojciech Fabianowski, Jerzy Siczek, Mechanical Testing of Epoxy ResinModified with Eco-Additives, Materials 16(5), 2023.
  5. Mateusz Oszczypała, Jarosław Ziółkowski, Jerzy Małachowski, Modelling the Operation Process of Light Utility Vehicles in Transport Systems Using Monte Carlo Simulation and Semi-Markov Approach, Energies 16(5), 2023.
  6. Mateusz Oszczypała, Jarosław Ziółkowski, Jerzy Małachowski, Aleksandra Lęgas, Nash Equilibrium and Stackelberg Approach for Traffic Flow Optimization in Road Transportation Networks — A Case Study of Warsaw, Applied Sciences-Basel 13(5), 2023.
  7. Radosław Ciepielewski, Danuta Miedzińska, A Study of Aluminum Honeycomb Structures under Dynamic Loading, with Consideration Given to the Effects of Air Leakage, Materials 16(6), 2023.
  8. Mateusz Oszczypała, Jarosław Ziółkowski, Jerzy Małachowski, Semi-Markov approach for reliability modelling of light utility vehicles, Eksploatacja i Niezawodność – Maintenance and Reliability 25(2), 2023.
  9. Michelangelo-Santo Gulino, Dario Vangi, Krzysztof Damaziak, Performance Assessment in a “Lane Departure” Scenario of Impending Collision for an ADAS Logic Based on Injury Risk Minimisation, Designs 7(3), 2023.
  10. Pawel Zochowski, Marcin Cegła, Krzysztof Szczurowski, Jędrzej Mączak, Marcin Bajkowski, Ewa Bednarczyk, Roman Grygoruk, Mariusz Magier, Dariusz Pyka, Mirosław Bocian, Krzysztof Jamroziak, Roman Gieleta, Piotr Prasuła, Experimental and numerical study on failure mechanisms of the 7.62×25 mm FMJ projectile and hyperelastic target material during ballistic impact, Continuum Mechanics and Thermodynamics 35(4), 2023.
  11. Natalia Daniel, Kamil Sybilski, Wojciech Kaczmarek, Dariusz Siemiaszko, Jerzy Małachowski, Relationship between EMG and fNIRS during Dynamic Movements, Sensors 23(11), 2023.
  12. Marcin Konarzewski, Robert Panowicz, Adam Jeschke, Double-Bend and Semi-Spherical Energy Deflectors’ Blast Load Efficiency — A Comparative Study, Applied Sciences-Basel 13(11), 2023.
  13. Joanna Szkutnik-Rogoż, Jerzy Małachowski, Optimization programming tools supporting supply chain management, Bulletin of the Polish Academy of Sciences: Technical Sciences 71(3), 2023.
  14. Paweł Bogusz, Digital Image Correlation Analysis of Strain Fields in Fibre-Reinforced Polymer – Matrix Composite under ±45° Off-Axis Tensile Testing, Polymers 15(13), 2023.
  15. Marcin Konarzewski, Michał Stankiewicz, Marcin Sarzyński, Marcin Wieczorek, Magdalena Czerwińska, Piotr Prasuła, Robert Panowicz, Properties of Rubber-Like Materials and their Blends in Wide Range of Temperatures – Experimental and Numerical Study, Acta Mechanica et Automatica 17(3), 2023.
  16. Tadeusz Dziubak, Sebastian Dziubak, Michał Tomaszewski, Numerical study of the effect of axial cyclone inlet velocity and geometrical parameters on separation efficiency and pressure drop, Powder Technology 427, 2023.
  17. Igor Betkier, Mateusz Oszczypała, Janusz Pobożniak, Sergiusz Sobieski, Przemysław Betkier, PocketFinderGNN: A manufacturing feature recognition software based on Graph Neural Networks (GNNs) using PyTorch Geometric and NetworkX, SoftwareX 23, 2023.
  18. Radosław Rzepliński, Mikołaj Sługocki, Michał Tomaszewski, Michał Kucewicz, Paweł Krajewski, Jerzy Małachowski, Bogdan Ciszek, Basilar tip fenestration giving rise to Percheron’s and mesencephalic arteries, Folia Morphologica, 2023.
  19. Natalia Daniel, Jerzy Małachowski, Wavelet analysis of the EMG signal to assess muscle fatigue in the lower extremities during symmetric movement on a rowing ergometer, Acta of Bioengineering and Biomechanics 25(2), 2023.
  20. Mateusz Oszczypała, Jakub Konwerski, Jarosław Ziółkowski, Jerzy Małachowski, Reliability analysis and redundancy optimization of k‑out-of‑n systems with random variable k using continuous time Markov chain and Monte Carlo simulation, Reliability Engineering & System Safety 242, 2023.
  21. Michelangelo-Santo Gulino, Krzysztof Damaziak, Anita Fiorentino, Dario Vangi, Handling inevitable collision states by Advanced Driver Assistance Systems functions: software-in-the-loop performance assessment of an injury risk-based logic in a “lane departure” scenario, Journal of Intelligent Transportation Systems, 2023.
  22. Igor Betkier, Mateusz Oszczypała, A novel approach to traffic modelling based on road parameters, weather conditions and GPS data using feedforward neural networks, Expert Systems with Applications 245, 2023.
  1. Barbara Nasiłowska, Zdzisław Bogdanowicz, Paweł Bogusz, Aneta Bombalska, Zygmunt Mierczyk, Study on the Effect of Deposited Graphene Oxide on the Fatigue Life of Austenitic Steel 1.4541 in Different Temperature Ranges, Materials 15(1), 2022.
  2. Paweł Bogusz, Arkadiusz Popławski, Michał Stankiewicz, Bartłomiej Kowalski, Experimental Research of Selected Lattice Structures Developed with 3D Printing Technology, Materials 15(1), 2022.
  3. Jarosław Ziółkowski, Józef Żurek, Jerzy Małachowski, Mateusz Oszczypała, Joanna Szkutnik-Rogoż, Method for Calculating the Required Number of Transport Vehicles Supplying Aviation Fuel to Aircraft during Combat Tasks, Sustainability 14(3), 2022.
  4. Jarosław Ziółkowski, Jerzy Małachowski, Mateusz Oszczypała, Joanna Szkutnik-Rogoż, Jakub Konwerski, Simulation model for analysis and evaluation of selected measures of the helicopter’s readiness, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 236(13), 2022.
  5. Radosław Ciepielewski, Roman Gieleta, Danuta Miedzińska, Experimental Study on Static and Dynamic Response of Aluminum Honeycomb Sandwich Structures, Materials 15(5), 2022.
  6. Mateusz Oszczypała, Jarosław Ziółkowski, Jerzy Małachowski, Reliability Analysis of Military Vehicles Based on Censored Failures Data, Applied Sciences-Basel 12(5), 2022.
  7. Paweł Baranowski, Michał Kucewicz, Mateusz Pytlik, Jerzy Małachowski, Shock-induced fracture of dolomite rock in small-scale blast tests, Journal of Rock Mechanics and Geotechnical Engineering 14(6), 2022.
  8. Piotr Buszman, Karolina Lukasik, Krzysztof Milewski, Magdalena Michalak, Marta Konopko, Michał Sobota, Mateusz Kachel, Janusz Kasperczyk, Jerzy Małachowski, Pawel Kazmierczak, Kamil Sybilski, Pawel Buszman, CRT-600.01 Vascular Response Study of Novel Material Biodegradable-Polymer Scaffolds in the Porcine Coronary Restenosis Model: Insights Into Development of New Bioresorbable Scaffolds, JACC: Cardiovascular Interventions 15(4), 2022.
  9. Michał Kucewicz, Paweł Baranowski, Roman Gieleta, Jerzy Małachowski, Investigation of dolomite’ rock brittle fracture using fully calibrated Karagozian Case Concrete model, International Journal of Mechanical Sciences 221, 2022.
  10. Michał Sałaciński, Krzysztof Puchała, Andrzej Leski, Elżbieta Szymczyk, Volodymyr Hutsaylyuk, Arkadiusz Bednarz, Piotr Synaszko, Rafał Kozera, Klaudia Olkowicz, Dominik Głowacki, Technological Aspects of a Reparation of the Leading Edge of Helicopter Main Rotor Blades in Field Conditions, Applied Sciences-Basel 12(9), 2022.
  11. Piotr Kędzierski, Andrzej Morka, A comprehensive approach to the modeling and simulation of ballistic textiles, Composite Structures 292, 2022.
  12. Djalel Eddine Tria, Attef Kouadria, Jerzy Małachowski, Yehya Bouteghrine, Amar Manaa, Performance evaluation of multilayered ceramic composite armors: New design and advanced predictive method, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 236, 2022.
  13. Marcin Konarzewski, Tomasz Durejko, Magdalena Łazińska, Magdalena Czerwińska, Piotr Prasuła, Robert Panowicz, Thermo‑oxidative aging of the polyoxymethylene (POM), acrylonitrile–butadiene–styrene (ABS) and polycarbonate (PC) polymers – a comparative study, Journal of Polymer Research 29(6), 2022.
  14. Paweł Bogusz, Danuta Miedzińska, Marcin Wieczorek, Experimental Investigation of the Tensile Behavior of Selected Tire Cords Using Novel Testing Equipment, Materials 15(12), 2022.
  15. Mateusz Oszczypała, Jarosław Ziółkowski, Jerzy Małachowski, Analysis of Light Utility Vehicle Readiness in Military Transportation Systems Using Markov and Semi-Markov Processes, Energies 15(14), 2022.
  16. Jarosław Ziółkowski, Aleksandra Lęgas, Elżbieta Szymczyk, Jerzy Małachowski, Mateusz Oszczypała, Joanna Szkutnik-Rogoż, Optimization of the Delivery Time within the Distribution Network, Taking into Account Fuel Consumption and the Level of Carbon Dioxide Emissions into the Atmosphere, Energies 15(14), 2022.
  17. Kamil Pietroń, Łukasz Mazurkiewicz, Kamil Sybilski, Jerzy Małachowski, Correlation of Bone Material Model Using Voxel Mesh and Parametric Optimization, Materials 15(15), 2022.
  18. Tomasz Klekiel, Katarzyna Arkusz, Grzegorz Sławiński, Piotr Malesa, Romuald Będziński, Numerical Analyses of Fracture Mechanism of the Pelvic Ring during Side-Impact Load, Materials 15(16), 2022.
  19. Piotr Buszman, Karolina Lukasik, Krzysztof Milewski, Magdalena Michalak, Marta Konopko, Michał Sobota, Mateusz Kachel, Janusz Kasperczyk, Jerzy Małachowski, Pawel Kazmierczak, Kamil Sybilskid Pawel Buszman, Vascular Response Study of Novel Material Biodegradable-Polymer Scaffolds in the Porcine Coronary Restenosis Model: Insights Into Development of New Bioresorbable Scaffolds, JACC-Cardiovascular Interventions 15(4), 2022.
  20. Pavlo E. Markovsky, Jacek Janiszewski, Dmytro G. Savvakin, Oleksandr O. Stasiuk, Kamil Cieplak, Paweł Baranowski, Sergey V. Prikhodko, Mechanical behavior of bilayer structures of Ti64 alloy and its composites with TiC or TiB under quasi-static and dynamic compression, Materials & Design 223, 2022.
  21. Radosław Rzepliński, Mikołaj Sługocki, Sylwia Tarka, Michał Tomaszewski, Michał Kucewicz, Krzysztof Karczewski, Paweł Krajewski, Jerzy Małachowski, Bogdan Ciszek, Mechanism of Spontaneous Intracerebral Hemorrhage Formation: An Anatomical Specimens-Based Study, Stroke 53(11), 2022.
  22. Paweł Baranowski, Michał Kucewicz, Mateusz Pytlik, Jerzy Małachowski, Study of rock fracture under blast loading, Bulletin of the Polish Academy of Sciences: Technical Sciences 70(5), 2022.
  23. Kamil Sybilski, Fábio A. O. Fernandes, Mariusz Ptak, Ricardo J. Alves de Sousa, Injury Biomechanics Evaluation of a Driver with Disabilities during a Road Accident – A Numerical Approach, Materials 15(22), 2022.
  24. Aleksandra Dejneka, Jerzy Małachowski, Łukasz Mazurkiewicz, Identification of muscle movements and activity by experimental methods for selected cases – stage#1, Acta of Bioengineering and Biomechanics 24(3), 2022.
  25. Danuta Miedzińska, Robert Wolański, Review of fibers and fabrics used for special services’ protective clothing in terms of their mechanical and thermal properties, Biuletyn Wojskowej Akademii Technicznej 71(1), 2022.
  26. Paweł Bogusz, Barbara Nasiłowska, Grzegorz Sławiński, Optical Strain Measurement and Microfractography of the Fractures of Armstal 550 Steel after Temperature Tensile Tests, Materials 15(24), 2022.
  27. Marcin Konarzewski, Michał Stankiewicz, Robert Panowicz, Marcin Sarzyński, Marcin Wieczorek, Properties of NBR and CR Hyperelastic Materials in a Wide Range of Both Positive and Negative Temperatures, Acta Polytechnica Hungarica 19(11), 2022.
  28. Aleksandra Dejneka, Jerzy Małachowski, Łukasz Mazurkiewicz, Identification of muscle movements and activity by experimental methods for selected cases – stage#2, Acta of Bioengineering and Biomechanics 24(4), 2022.
  29. Wiesław Krasoń, Daniel Dobrowolski, Structural design and selected aspects of numerical simulations of a prototype container-platform for intermodal transport, Journal of Civil Engineering and Transport 4(3), 2022.
  1. Gzik-Zroska Bożena, Joszko Kamil, Wolański Wojciech, Suchoń Sławomir, Burkacki Michał, Ples Marek, Małachowski Jerzy, Tomaszewski Michał, Szarek Arkadiusz, Stradomski Grzegorz, Kitala Diana, Akbari Mohsen, Gzik Marek, Assessment of the Impact of Decellularization Methods on Mechanical Properties of Biocomposites Used as Skin Substitute, Materials 2021, 16,
  2. Miedzińska Danuta, Selection of material model of chosen photocurable resin for application in finite element analyses, Technical Science 2021, 1 – 13,
  3. Miedzińska Danuta, Giełżecki Jan, Mania Ryszard, Marszałek Konstanty, Wolański Robert, Influence of Ti‐Si‐N Nanocomposite Coating on Heat Radiation Resistance of Fireproof Fabrics, Materials 2021, 18,
  4. Ziółkowski Jarosław, Małachowski Jerzy, Oszczypała Mateusz, Szkutnik-Rogoż Joanna, Lęgas Aleksandra, Modelling of the Military Helicopter Operation Process in Terms of Readiness, Defence Science Journal 2021, 602 – 611,
  5. Ziółkowski Jarosław, Oszczypała Mateusz, Małachowski Jerzy, Szkutnik-Rogoż Joanna, Use of Artificial Neural Networks to Predict Fuel Consumption on the Basis of Technical Parameters of Vehicles, Energies 2021, 23,
  6. Małachowski Jerzy, Ziółkowski Jarosław, Szkutnik-Rogoż Joanna, Lęgas Aleksandra, Oszczypała Mateusz, Assessment of options to meet transport needs using the MAJA multi-criteria method, Archives of Transport 2021, 25 – 41,
  7. Zalewska Justyna, Damaziak Krzysztof, Małachowski Jerzy, An Energy Efficiency Estimation Procedure for Small Wind Turbines at Chosen Locations in Poland, Energies 2021, 18,
  8. Sybilski Kamil, Małachowski Jerzy, Impact of disabled driver’s mass center location on biomechanical parameters during crash, Applied Sciences 2021, 17,
  9. Pająk Małgorzata, Baranowski Paweł, Janiszewski Jacek, Kucewicz Michał, Mazurkiewicz Łukasz, Łaźniewska-Piekarczyk Beata, Experimental testing and 3D meso-scale numerical simulations of SCC subjected to high compression strain rates, Construction and Building, Materials 2021, 21,
  10. Baranowski Paweł, Damaziak Krzysztof, Numerical Simulation of Vehicle – Lighting Pole Crash Tests: Parametric Study of Factors Influencing Predicted Occupant Safety Levels, Materials 2021, 19,
  11. Baranowski Paweł, Kucewicz Michał, Małachowski Jerzy, Sielicki Piotr W., Failure behavior of a concrete slab perforated by a deformable bullet, Engineering Structures 2021, 20,
  12. Prochenka Paweł, Janiszewski Jacek, Kucewicz Michał, Crash Response of Laser-Welded Energy Absorbers Made of Docol 1000DP and Docol 1200M Steels, Materials 2021, 18,
  13. Malesa Piotr, Sławiński Grzegorz, Pęcherzewska Karolina, Numerical Analysis and Experimental Test for the Development of a Small Shaped Charge, Applied Sciences 2021, 14,
  14. Rzepliński Radosław, Tomaszewski Michał, Sługocki Mikołaj, Karczewski Krzysztof, Krajewski Paweł, Skadorwa Tymon, Małachowski Jerzy, Ciszek Bogdan, Method of creating 3D models of small caliber cerebral arteries basing on anatomical specimens, Journal of Biomechanics 2021, 4,
  15. Panowicz Robert, Konarzewski Marcin, Durejko Tomasz, Szala Mateusz, Łazińska Magdalena, Czerwińska Magdalena, Prasuła Piotr, Properties of Polyethylene Terephthalate (PET) after Thermo-Oxidative Aging, Materials 2021, 16,
  16. Hryciów Zdzisław, Rybak Piotr, Gieleta Roman, The influence of temperature on the damping characteristic curves of hydraulic shock absorbers, Eksploatacja i Niezawodność 2021, 346 – 351,
  17. Hryciów Zdzisław, Krasoń Wiesław, Wysocki Józef, Evaluation of the influence of friction in a multi-leaf spring on the working conditions of a truck driver, Eksploatacja i Niezawodność 2021, 422 – 429,
  1. Derewońko Agnieszka, Szymczyk Elżbieta, Jachimowicz Jerzy, Numeryczne szacowanie poziomu naprężeń resztkowych w zakuwanym połączeniu nitowym, Przegląd Mechaniczny 2020, 32 – 42,
  2. Kravcov Aleksander, Franek Ondrej, Mrozov Nikolaj, Kucewicz Michał, Tomaszewski Michał, Svoboda Pavel, Baranowski Paweł, Laser ultrasonic measurment of mechanical decay in limestone caused by freeze- thaw cycles, Acta Polytechnica 2020, 410 – 414,
  3. Leski Andrzej, Improving the accuracy of fatigue damage calculations for archived data, Fatigue of Aircraft Structures 2019, 113 – 120,
  4. Leski Andrzej, Wronicz Wojciech, Kowlaczyk Piotr, Szmidt Michał, Conception of Modular Test Stand for Fatigue Testing of Aeronautical Structures, Lecture Notes in Mechanical Engineering 2020, 747 – 761,
  5. Popławski Arkadiusz, Kędzierski Piotr, Morka Andrzej, Identification of Armox 500T steel failure properties in the modeling of perforation problems, Materials and Design 2020, 1 – 13,
  6. Miedzińska Danuta, Influence of Grains Shape Irregularity in Porous Ceramics — Numerical Study, Materials 2020, 1 – 12,
  7. Miedzińska Danuta, Gieleta Roman, Popławski Arkadiusz, Experimental study on influence of curing time on strength behaviour of SLA-printed samples loaded with different strain rates, Materials 2020, 16,
  8. Pacek Dawid, Gieleta Roman, The fluid-based structure for human body impact protection, Journal of Physics: Conference Series 2020, 1 – 10,
  9. Ryzińska Grażyna, Gieleta Roman, Effect of Test Velocity on the Specific Energy Absorption under Progressive Crushing of Composite Tubes, Advances in Science and Technology Research Journal 2020, 94 – 102,
  10. Sławiński Grzegorz, Będziński Romuald, Ratajczak Monika, Klekiel Tomasz, Investigation of Helmet-Head Interaction in the Aspect of Craniocerebral Tissue Protection, Advances in Intelligent Systems and Computing 2020,
  11. Bukała Jakub, Buszman Piotr P., Małachowski Jerzy, Mazurkiewicz Łukasz, Sybilski Kamil, Experimental Tests, FEM Constitutive Modeling and Validation of PLGA Bioresorbable Polymer for Stent Applications, Materials 2020, 1 – 19,
  12. Małachowski Jerzy, Ziółkowski Jarosław, Szkutnik-Rogoż Joanna, Lęgas Aleksandra, Oszczypała Mateusz, Application of the Bloch-Schmigalla Method to Optimize the Organization of the Process of Repairing Unmanned Ground Vehicles, Advances in Science and Technology Research Journal 2020, 39 – 48,
  13. Żurek Józef, Małachowski Jerzy, Ziółkowski Jarosław, Szkutnik-Rogoż Joanna, Reliability Analysis of Technical Means of Transport, Applied Sciences-Basel 2020, 1 – 17,
  14. Mazurkiewicz Łukasz, Bukała Jakub, Małachowski Jerzy, Tomaszewski Michał, Buszman Piotr, BVS stent optimisation based on a parametric model with a multistage validation proces, Materials and Design 2020, 1 – 12,
  15. Klasztorny Marian, Nycz Daniel, Bogusz Paweł, Rheological effects in in-plane shear test and in-plane shear creep test on glass-vinyl-ester lamina, Composites Theory and Practice 2020, 35 – 42,
  16. Klasztorny Marian, Zając Kamil, Nycz Daniel, GFRP composite footbridge series with multi-box cross section – Part 1: Design methodology, conceptual design and global detailed design, Composite Structures 2020, 1 – 20,
  17. Klasztorny Marian, Zając Kamil, Nycz Daniel, GFRP composite footbridge series with multi-box cross section – Part 2: Local detailed design, Composite Structures 2020, 1 – 27,
  18. Dziendzikowski Michał, Zieliński Wojciech, Reymer Piotr, Kurdelski Marcin, Synaszko Piotr, Klimczyk Witold, Leski Andrzej, Dragan Krzysztof, Substitute models for structural components loads estimation based on flight parameters and statistical inference methods, Lecture Notes in Mechanical Engineering 2020, 1128 – 1137,
  19. Burkacki Michał, Wolański Wojciech, Suchoń Sławomir, Joszko Kamil, Gzik-Zroska Bożena, Sybilski Kamil, Gzik Marek, Finite element head model for the crew injury assessment in a light armoured vehicle, Acta of Bioengineering and Biomechanics 2020, 173 – 183,
  20. Kucewicz Michał, Leski Andrzej, Accuracy study of stress intensity factor solutions obtained by commercial FE software, AIP Conference Proceedings 2019, 7,
  21. Kucewicz Michał, Małachowski Jerzy, Baranowski Paweł, Płatek Paweł, Antolak-Dudka Anna, Sarzyński Marcin, Durejko Tomasz, Janiszewski Jacek, Czujko Tomasz, Deformation of honeycomb cellular structures manufactured with Laser Engineered Net Shaping (LENS) technology under quasi-static loading: Experimental testing and simulation, Additive Manufacturing 2019, 307 – 316,
  22. Kucewicz Michał, Baranowski Paweł, Małachowski Jerzy, A method of failure modeling for 3D printed cellular structures, Materials and Design 2019, 307 – 316,
  23. Kucewicz Michał, Baranowski Paweł, Małachowski Jerzy, Determination and validation of Karagozian-Case Concrete constitutive model parameters for numerical modeling of dolomite rock, International Journal of Rock Mechanics and Mining Sciences 2020, 1 – 13,
  24. Kucewicz Michał, Baranowski Paweł, Małachowski Jerzy, Dolomite fracture modeling using the Johnson-Holmquist concrete material model: Parameter determination and validation, Journal of Rock Mechanics and Geotechnical Engineering 2020, 1 – 17,
  25. Sałaciński Michał, Orzechowski Paweł, Chalimoniuk Marek, Leski Andrzej, Analysis of bonding layer quality in repair process of aircraft composite structure after impact damage, Composites Theory and Practice 2020, 134 – 141,
  26. Tomaszewski Michał, Sybilski Kamil, Małachowski Jerzy, Wolański Wojciech, Buszman Piotr P., Numerical and experimental analysis of balloon angioplasty impact on flow hemodynamics improvement, Acta of Bioengineering and Biomechanics 2020, 169 – 183,
  27. Tomaszewski Michał, Sybilski Kamil, Baranowski Paweł, Małachowski Jerzy, Experimental and numerical flow analysis through arteries with stent using particle image velocimetry and computational fluid dynamics method
  28. Biocybernetics and Biomedical, Engineering 2020, 740 – 751,
  29. Ziętala Michał, Durejko Tomasz, Panowicz Robert, Konarzewski Marcin, Microstructure Evolution of 316L Steel Prepared withthe Use of Additive and Conventional Methods and Subjected to Dynamic Loads: A Comparative Study, Materials. 2020, 1 – 17,
  30. Baranowski Paweł, Małachowski Jerzy, Mazurkiewicz Łukasz, Local blast wave interaction with tire structure, Defence Technology 2020, 520 – 529,
  31. Baranowski Paweł, Mazurkiewicz Łukasz, Małachowski Jerzy, Pytlik Mateusz, Experimental testing and numerical simulations of blast-induced fracture of dolomite rock, Meccanica 2020, 2337 – 2352,
  32. Baranowski Paweł, Kucewicz Michał, Gieleta Roman, Stankiewicz Michał, Konarzewski Marcin, Bogusz Paweł, Pytlik Mateusz, Małachowski Jerzy, Fracture and fragmentation of dolomite rock using the JH‑2 constitutive model: Parameter determination, experiments and simulations, International Journal of Impact Engineering 2020, 1 – 13,
  33. Płatek Paweł, Rajkowski Kamil, Cieplak Kamil, Sarzyński Marcin, Małachowski Jerzy, Woźniak Ryszard, Janiszewski Jacek, Deformation Process of 3D Printed Structures Made from Flexible Material with Dierent Values of Relative Density, Polymers 2020, 1 – 25,
  34. Buszman Piotr, Kachel Mateusz, Michalak Magdalena, Konopko Marta, Sobota Michał, Małachowski Jerzy, Buszman Paweł, Milewski Krzysztof, Implantation feasibility and early vascular response of a novel plla/plga bioresorbable scaffold in porcine coronary in-stent restenosis model, Journal of the American College of Cardiology.2020, 0735 – 1097,
  35. Kędzierski Piotr, Morka Andrzej, Stanisławek Sebastian, Surma Zbigniew, Numerical modeling of the large strain problem in the case of mushrooming projectiles, International Journal of Impact Engineering 2020, 1 – 14,
  36. Szurgott Piotr, Bernacki Paweł, Modelling of steel-concrete bridges subjected to a moving high-speed train, International Journal of Simulation Modelling 2020, 29 – 40,
  37. Panowicz Robert, Konarzewski Marcin, Influence of Imperfect Position of a Striker and Input Bar on Wave Propagation in a Split Hopkinson Pressure Bar (SHPB) Setup with a Pulse-Shape Technique, Applied Sciences-Basel 2020, 1 – 11,
  38. Stanisławek Sebastian, Morka Andrzej, On the Blast Mitigation Ability of Multiple V‑Shape Deflectors, Hindawi Shock and Vibration 2020, 1 – 8,
  39. Dziubak Tadeusz, Bąkała Leszek, Karczewski Mirosław, Tomaszewski Michał, Numerical research on vortex tube separator for special vehicle engine inlet air filter, Separation and purification technology 2020, 1 – 14.
  1. Sławiński Grzegorz, Malesa Piotr, Świerczewski Marek, Analysis Regarding the Risk of Injuries of Soldiers Inside a Vehicle during Accidents Caused by Improvised Explosive Devices, Applied Sciences, 2019, 9(19):4077, , Impact Factor: 2,2017.
  2. Kucewicz Michał, Baranowski Paweł, Małachowski Jerzy, Trzciński Waldemar, Szymańczyk Leszek, Numerical modelling of cylindrical test for determining jones – Wilkins – Lee equation parameters, Lecture Notes in Mechanical Engineering, 2019, pp. 388 – 394, Impact Factor: 0,37.
  3. Szafrański Tomasz, Małachowski Jerzy, Damaziak Krzysztof, Modal analyses of small wind turbine, Lecture Notes in Mechanical Engineering, 2019, pp. 784 – 789, Impact Factor: 0,37.
  4. Szurgott Piotr, Jarzębski Łukasz, Selection of a Hyper-Elastic Material Model – a Case Study for a Polyurethane Component, Latin American Journal of Solid and Structural, 2019, 16(5), e191, p. 1 – 16, Impact Factor: 1,25.
  5. Arkusz Katarzyna, Klekiel Tomasz, Sławiński Grzegorz, Będziński Romuald, Influence of energy absorbers on Malgaigne fracture mechanism in lumbar-pelvic system under vertical impact load. Computer Methods in Biomechanics and Biomedical Engineering, Vol. 22, 2019, Issue 3. Impact Factor: 1,974.
  6. Kucewicz, Michał; Baranowski, Paweł; Małachowski, Jerzy, A method of failure modeling for 3D printed cellular structures, Materials and Design, 174 (2019) 107802, Impact Factor: 4.525.
  7. Szafrańska, Aleksandra; Antolak-Dudka, Anna; Baranowski, Paweł; Bogusz, Paweł; Zasada, Dariusz; Małachowski, Jerzy; Czujko, Tomasz, Identification of Mechanical Properties for Titanium Alloy Ti-6Al-4V Produced Using LENS Technology. Materials 2019, 12, 886. Impact Factor: 2,467.
  8. Antolak-Dudka Anna, Płatek Paweł, Durejko Tomasz, Baranowski Paweł, Małachowski Jerzy, Sarzyński Marcin, Czujko Tomasz, Static and Dynamic Loading Behavior of Ti6Al4V Honeycomb Structures Manufactured by Laser Engineered Net Shaping (LENSTM) Technology, Materials 2019, 12, 1225, Impact Factor: 2,467.
  1. Klasztorny Marian, Nycz Daniel, Labuda R., Modelling, simulation and experimental validation of bend tests on GFRP laminate beam and plate specimens, Composite Structures, 2018, 184, pp. 604 – 612, Impact Factor: 4,101.
  2. Mazurkiewicz Łukasz, Małachowski Jerzy, Damaziak Krzysztof, Tomaszewski Michał, Evaluation of the response of fibre reinforced composite repair of steel pipeline subjected to puncture from excavator tooth, Composite Structures, 202 (2018) 1126 – 1135, Impact Factor: 4,101.
  3. Klasztorny Marian, Zielonka K., Nycz Daniel, Posuniak P., Romanowski R., Experimental validation of simulated TB32 crash tests for SP-05/02 barier on horizontal concave arc without and with composite overlay, Archives of Civil and Mechanical Engineering, 2018, 18:2, pp. 339 – 355, Impact Factor: 2.763.
  4. Miedzińska Danuta, Gieleta Roman, Małek Ewelina, Zasada D., Stankiewicz Michał, Marszałek K., Experimental research on influence of gas impact on thermal and mechanical properties of auxetic material covered with titanium silicide coating, Bulletin Of The Polish Academy Of Sciences, Technical Sciences, 2018, Vol. 66, No. 2, pp.: 165 – 172, Impact Factor: 1.323.
  5. Derewońko Agnieszka, Observations on FEM modelling of adhesive joint debonding, International Journal of Adhesion And Adhesives, 2018, 81, 65 – 73, Impact Factor: 1.773.
  6. Kucewicz Michał, Baranowski Paweł, Małachowski Jerzy, Popławski Arkadiusz, Płatek Paweł, Modelling, and characterization of 3D printed cellular structures, Materials and Design, 2018, Vol. 142 pp: 177 – 189, Impact Factor: 4,525.
  7. Miedzińska Danuta, Lutyński Marcin, CO2-CH4 sorption induced swelling of gas shales: An experimental study on the Silurian shales from the Baltic Basin, Poland, Physicochemical Problems of Mineral Processing, 2018, 54(2), 2018, 415 – 427.
  8. Kwiatkowski Piotr, Małachowski Jerzy, Jakubas-Kwiatkowska W., Gołębiewski Sławomir, Gil Robert, Kwasiborski P., Kałuza Bernadetta, Sutkowska Edyta, The effects of types of guidewires and pressure applied during stent implantation in the main vessel on the incidence of damage to coronary guidewires during angioplasty of coronary bifurcation lesions – Wide Beast study, Journal Of Interventional Cardiology, 2018, Impact Factor: 18.737.
  9. Mazurkiewicz Łukasz, Baranowski Paweł, Karimi Reza Hamid, Damaziak Krzysztof, Małachowski Jerzy, Muszyński Artur, Muszyński Andrzej, Robbersmyr Kjell G., Vangi Dario, Improved child-resistant system for better side impact protection, International Journal of Advanced Manufacturing Technology, 2018, pp. 1 – 11 p., Impact Factor: 2.601.
  10. Panowicz Robert, Janiszewski Jacek, Kochanowski K., Numerical and Experimental Studies of a Conical Striker Application for the Achievement of a True and Nominal Constant Strain Rate in SHPB Tests, Experimental Mechanics, 2018, Impact Factor 1.548.
  11. Panowicz Robert, Janiszewski Jacek, Kochanowski Krzysztof, The influence of non-axisymmetric pulse shaper position on shpb experimental data, 56, 3, pp. 873 – 886, Journal Of Theoretical And Applied Mechanics, Warsaw 2018, Impact Factor: 0.974.
  12. Nasiłowska Barbara, Derewońko Agnieszka, Bogdanowicz Z., TIG and laser beam welded joints – simplified numerical analyses, Journal Of Theoretical And Applied Mechanics, 56, 3, pp. 645 – 656, Warsaw 2018, Impact Factor: 0.974.
  13. Panowicz Robert, Janiszewski Jacek, Kochanowski Krzysztof, Influence of pulse shaper geometry on wave pulses in shpb experiments, Journal Of Theoretical And Applied Mechanics, 56, 4, pp. 1217 – 1221, Warsaw 2018, Impact Factor: 0.974.
  14. Arkusz Katarzyna, Klekiel Tomasz, Niezgoda Tadeusz, Będziński Romuald, The influence of osteoporotic bone structures of the pelvic-hip complex on stress distribution under impact load, Acta of Bioengineering and Biomechanics, Vol. 20, No. 1, 2018, s. 29 – 38, Impact Factor: 1.022.
  15. Gasiorek D., Baranowski Paweł, Małachowski Jerzy, Mazurkiewicz Łukasz, Wiercigroch M., Modelling of guillotine cutting of multi-layered aluminum sheets, Journal of Manufacturing Processes, 34 (2018) 374 – 388, Impact Factor: 2,809.
  16. Miedzińska Danuta, Popławski Arkadiusz, Kwietniewski Michał, Lutyński M., The impact of CO2 injection on steel balls embedment in shale rock – Experimental research, Journal of Natural Gas Science and Engineering, 2018, Vol. 56, s. 619 – 628, Impact Factor: 2.157.
  17. Cadoni Ezio, Forni Daniele, Gieleta Roman, Kruszka Leopold, Tensile and compressive behaviour of S355 mild steel in a wide range of strain rates, European Physical Journal-Special Topics, 2018, 227, s. 29 – 43, Impact Factor: 1.399.
  18. Hryciów Zdzisław, Krasoń Wiesław, Wysocki Józef, The experimental tests on the friction coefficient between the leaves of the multi-leaf spring considering a condition of the friction surfaces, Eksploatacja i Niezawodnosc – Maintenance and Reliability, 2018; 20 (4): 682 – 688, Impact Factor: 1.296.
  19. Bukala Jakub, Damaziak Krzysztof, Karimi Hamid Reza, Malachowski Jerzy, Robbersmyr Kjell Gunnar, Evolutionary computing methodology for small wind turbine supporting structures, The International Journal of Advanced Manufacturing Technology, 2018, Impact Factor: 2.601.
  20. Panowicz Robert, Janiszewski Jacek, Kochanowski Krzysztof, Effects of Sample Geometry Imperfections on the Results of Split Hopkinson Pressure Bar Experiments, Experimental Techniques, 2018, Impact Factor: 0,545.
  1. Klasztorny Marian, Nycz Daniel, Romanowski Roman, Gotowicki Paweł, Kiczko Andrzej, Rudnik Dariusz, Effects of operating temperatures and accelerated environmental ageing on the mechanical properties of a glass-vinylester composite, Mechanics of Composite Materials, 2017, Vol. 53, No. 3, pp. 335 – 350, Impact Factor: 0.72.
  2. Małachowski Jerzy, L’vov G., Daryazadeh S., Numerical prediction of the parameters of a yield criterion for fibrous composites, Mechanics of Composite Materials, 2017, j. angielski, Vol. 53, No. 5, 589 – 600, Impact Factor: 0.72.
  3. Panowicz Robert, Janiszewski Jacek, Traczyk Maciej, Strain measuring accuracy with splitting-beam laser extensometer technique at split Hopkinson compression bar experiment, Bulletin of the Polish Academy of Sciences-Technical Sciences, 2017, Vol. 65, No. 2, 163 – 169, Impact Factor: 1.323.
  4. Mazurkiewicz Lukasz, Tomaszewski Michal, Malachowski Jerzy, Sybilski Kamil, Chebakov Mikhail, Witek Maciej, Yukhymets Peter, Dmitrienko Roman, Experimental and numerical study of steel pipe with part-wall defect reinforced with fibre glass sleeve, International Journal of Pressure Vessels and Piping, 2017, 149 (2017) 108 – 119, Impact Factor: 2.014.
  5. Baranowski Paweł, Janiszewski Jacek, Małachowski Jerzy, Tire rubber testing procedure over a wide range of strain rates, Journal of Theoretical and Applied Mechanics, 55, 2, pp. 727 – 739, Warsaw 2017, Impact Factor: 0.974.
  6. Gawlak Dominika, Manka-Malara Katarzyna, Mierzwinska-Nastalska Elzbieta, Gieleta Roman, Kaminski Tomasz, Luniewska Magdalena, A comparison of impact force reduction by polymer materials used for mouthguard fabrication, Acta of Bioengineering and Biomechanics, 2017, Vol. 19, Is. 1, pp.: 89 – 95, Impact Factor: 1.022.
  7. Bukała Jakub, Kwiatkowski Piotr, Małachowski Jerzy, Numerical analysis of crimping and inflation process of balloon‐expandable coronary stent using implicit solution, International Journal for Numerical Methods in Biomedical Engineering, 2017, e2890, 1‑11 p., j. angielski, Vol. 33, Is. 12, Impact Factor: 2.607.
  8. Krasoń Wiesław, Wysocki Józef, Investigation of friction in dual leaf spring, Journal of Friction and Wear, 2017, 38, 3, pp. 214 – 220, Impact Factor: 0.581.
  9. Baranowski Paweł, Damaziak Krzysztof, Mazurkiewicz Łukasz, Małachowski Jerzy, Muszyński Artur, Vangi Dario, Analysis of Mechanics of Side Impact Test Defined in UN/ECE Regulation 129, Traffic Injury Prevention, 2017, Impact Factor: 1.407.
  10. Mazurkiewicz Łukasz, Małachowski Jerzy, Tomaszewski Michał, Baranowski Paweł, Yukhymets Peter, Performance of steel pipe reinforced with composite sleave, Composite Structures, 2017, Vol. 183, 1 January 2018, Pages 199 – 211, Impact Factor: 4,101.
  11. Szurgott Piotr, Klasztorny Marian, Niezgoda Tadeusz, Miedzińska Danuta, Gieleta Roman, Dynamic Tests for Energy Absorption by Selected Auxetic Fabrics, Journal of Engineered Fibers and Fabrics, 2017, Vol. 12, Is. 4, pp. 7 – 14, Impact Factor: 0.678
  12. Panowicz Robert, Konarzewski Marcin, Trypolin Michał, Analysis of Criteria for Determining a TNT Equivalent, Strojniski Vestnik-Journal of Mechanical Engineering, 2017, Vol. 63, No.11, 666 – 672, Impact Factor: 1,182.
  1. Bukała Jakub, Kwiatkowski Piotr, Małachowski Jerzy, Numerical analysis of stent expansion process in coronary artery stenosis with the use of non-compliant balloon, Biocybernetics and Biomedical Engineering, 2016, 36, 145 – 156, Impact Factor: 1.432
  2. Kędzierski Piotr, Gieleta Roman, Morka Andrzej, Niezgoda Tadeusz, Surma Zbigniew, Experimental study of hybrid soft ballistic structures, Composite Structures, 2016, 153, 204 – 211, Impact Factor: 4,101.
  3. Kędzierski Piotr, Nagórski Zdzisław, Niezgoda Tadeusz, Determination of local values of heat transfer coefficient in geothermal models with internal functions method, Renewable Energy, 2016, 92, 506 – 516, Impact Factor: 4.451.
  4. Adrian Neacsa, Alin Dinita, Baranowski Paweł, Sybilski Kamil, Naim Ibrahim Ramadan, Małachowski Jerzy, Blyukher Boris, Experimental and numerical testing of gas pipeline subjected to excavator elements interference, Journal of Pressure Vessel Technology (ASME Journal), 2016, 138, 3, pp: 031701 – 1‑031701 – 9, Impact Factor: 1.002.
  5. Morka Andrzej, Kędzierski Piotr, Muzolf Paweł, Optimization of the structure of a ceramicaluminum alloy composite subjected to the impact of hard steel projectiles, Mechanics of Composite Materials; 2016 Springer Science+Business Media New York, 2016, 52, 3, 333 – 346, Impact Factor: 0.72.
  6. Sokołowski Dariusz, Barnat Wiesław, Numerical and experimental research on the impact of the twaron T750 fabric layer number on the stab resistance of a body armour package, FIBRES & TEXTILES in Eastern Europe, 2016, DOI: 10.5604/12303666.1172090, 24, 1(115), 78 – 82, Impact Factor: 0.757.
  7. Baranowski Paweł, Damaziak Krzysztof, Małachowski Jerzy, Sergienko V.P., Bukharov S.N., Modeling of Abrasive Wear by the Meshless Smoothed Particle Hydrodynamics Method, Journal of Friction and Wear, 2016, 37, 1, 94 – 99, Impact Factor: 0.581.
  8. Klasztorny Marian, Nycz Daniel B., Szurgott Piotr, Modelling and simulation of crash tests of N2-W4‑A category safety road barrier in horizontal concave arc, International Journal of Crashworthiness, 2016, ISSN: 1358 – 8265 (Print) 1754 – 2111 (Online), 1 – 16 p., Impact Factor: 0.969.
  9. Baranowski Paweł, Małachowski Jerzy, Mazurkiewicz Łukasz, Numerical and experimental testing of vehicle tyre under impulse loading conditions, International Journal of Mechanical Sciences, 2016, 106, 346 – 356, Impact Factor: 3.622.
  10. Małachowski Jerzy, Damaziak Krzysztof, Płatek Paweł, Sarzyński Marcin, Kupidura Przemysław, Woźniak Ryszard, Zahor Mirosław, Numerical and experimental failure analysis of rifle extractor, Engineering Failure Analysis, 2016, 62, 112 – 127, Impact Factor: 2.148
  11. Bukała Jakub, Damaziak Krzysztof, Karimi Reza Hamid, Małachowski Jerzy, Aero-elastic coupled numerical analysis of small wind turbine – generator modelling, Wind and Structures, 2016, 23, 6, 577 – 597, Impact Factor: 1.134.
  12. Baranowski Paweł, Małachowski Jerzy, Janiszewski Jacek, Wekezer Jerry, Detailed tyre FE modelling with multistage validation for dynamic analysis, Materials & Design, 2016, 96, 68 – 79, Impact Factor: 4.753.
  13. Pałka Norbert, Panowicz Robert, Chalimoniuk Marek, Beigang Rene, Non-destructive evaluation of puncture region in polyethylene composite by terahertz and X‑ray radiation, Composite Part B, 2016, 92, 315 – 325, Impact Factor: 4.858.
  14. Panowicz Robert, Janiszewski Jacek, Tensile split hopkinson bar technique: numerical analysis of the problem of wave disturbance and specimen geometry selection, Metrology and Measurement Systems, 2016, Vol. 23, No. 3, pp. 425 – 436, Impact Factor: 1.227.
  15. Ryzińska G., Gieleta Roman, Experimental and numerical modeling of the extrusion process in 1050a aluminum alloy for design of impact energy-absorbing devices, Strength of Materials, 2016, 48, 4, 551 – 560, Impact Factor: 0.521.
  16. Sutkowska Edyta, Sutkowski Krzysztof, Małachowski Jerzy, Kwasiborski Przemysław, Kwiatkowski Piotr, The prevalence of “jailed” coronary guidewire’s damage, among patients with type 2 diabetes, Diabetes & Metabolism, 2016, 42, 4, Impact Factor 3.710.
  17. Kwiatkowski Piotr, Sutkowska Edyta, Malachowski Jerzy, Jakubas-Kwiatkowska W., Golebiewski Slawomir, Gil Robert, TCT-325 The effects of types of guidewires and pressure applied during stent implantation in the main vessel on the incidence of damage to coronary guidewires during angioplasty of coronary bifurcation lesions – Wide Beast study, Journal Of The American College Of Cardiology, 11/2016; 68(18), Impact Factor: 16.834.
  18. Bukała Jakub, Kwiatkowski Piotr, Małachowski Jerzy, Numerical analysis of stent expansion proces in coronary artery stenosis with the use of non-compliant ballon, Biocybernetics and Biomedical Engineering, 2016, Vol. 36, Issue 1, 145 – 156, Impact Factor: 1.432.
  1. Bukala Jakub, Damaziak Krzysztof, Karimi Hamid Reza, Kroszczynski Krzysztof, Krzeszowiec Marcin, Malachowski Jerzy, Modern small wind turbine design solutions comparison in terms of estimated cost to energy output ratio, Renewable Energy, 2015, 83 (2015) 1166 – 1173, Impact Factor: 4.981.
  2. Mazurkiewicz Łukasz, Małachowski Jerzy, Baranowski Paweł, Optimization of protective panel for critical supporting elements, Composite Structures, 2015, 134 (2015) 493 – 505, Impact Factor: 4.451.
  3. Jachimowicz Jerzy, Elżbieta Szymczyk, Krzysztof Puchała, Study of material mass efficiency and numerical analysis of modified CFRP laminate in bearing conditions, Composite Structures, 2015, 134 (2015) 114 – 123, Impact Factor: 4.451.
  4. Bondyra Agnieszka, Klasztorny Marian, Muc Aleksander, Design of composite tank covers, Composite Structures, 2015, 134, 72 – 81, j. angielski, 40 pkt., Impact Factor: 4.451.
  5. Kędzierski Piotr, Morka Andrzej, Sławiński Grzegorz, Niezgoda Tadeusz, Optimization of two-component armour, Bulletin of the Polish Academy of Science Technical Science, 2015, 63, 1, 173 – 179, Impact Factor: 1.323.
  6. Salamonowicz Z., Kotowski M., Półka Marzena, Barnat Wiesław, Numerical simulation of dust explosion in the spherical 201 vessel, Bulletin of the Polish Academy of Science Technical Science, 2015, 63, 1, 289 – 293, Impact Factor: 1.323.
  7. Chabera P., Boczkowska Anna, Morka Andrzej, Kędzierski Piotr, Niezgoda Tadeusz, Oziębło A., Witek A., Comparison of numerical and experimental study of armour system based on alumina and silicon carbide ceramics, Bulletin of the Polish Academy of Science Technical Science, 2015, 63, 2, 363 – 367, Impact Factor: 1.323.
  8. Barnat Wiesław, Validation of the pressure wave model in the aspect of special structures endurance, Bulletin of the Polish Academy of Science Technical Science, 2015, 63, 3, 707 – 716, Impact Factor: 1.323.
  9. Krasoń Wiesław, Małachowski Jerzy, Multibody rigid models and 3D FE models in numerical analysis of transport aircraft main landing gear, Bulletin of the Polish Academy of Science Technical Science, 2015, 63, 3, 745 – 747, Impact Factor: 1.323.
  10. Stanisławek Sebastian, Morka Andrzej, Niezgoda Tadeusz, Pyramidal ceramic armor ability to defeat projectile threat by changing its trajectory, Bulletin of the Polish Academy of Science Technical Science, 2015, 63, 4, 843 – 849, Impact Factor: 1.323.
  11. Barnat, Wiesław. Numerical examination of the influence of headrest use on the body of a soldier in a vehicle loaded with a 25 kg side load, Eksploatacja i Niezawodność – Maintenance and Reliability, 2015, Impact Factor: 1.296.
  12. Baranowski Paweł, Małachowski Jerzy, Numerical study of selected military vehicle chassis subjected to blast loading in terms of tire strength improving, Bulletin of the Polish Academy of Science Technical Science, 2015, 63, 4, 867 – 878, Impact Factor: 1.323.
  13. Pałka Norbert, Krimi Soufiene, Ospald Frank, Miedzińska Danuta, Gieleta Roman, Małek Marcin, Beigang Rene, Precise Determination of Thicknesses of Multilayer Polyethylene Composite Materials by Terahertz Time-Domain Spectroscopy, Journal of Infrared Millimeter and Terahertz Waves, 2015, 36, 578 – 596, Impact Factor: 2.084.
  14. Pałka Norbert, Panowicz Robert, Ospald F., Beigang R., 3D non-destructive imaging of punctures in polyethylene composite armor by THz time domain spectroscopy, Journal of Infrared Millimeter and Terahertz Waves, 2015, 36,770 – 788, Impact Factor: 2.084.
  15. Bukała Jakub, Damaziak Krzysztof, Kroszczyński Krzysztof, Krzeszowiec Marcin, Małachowski Jerzy, Investigation of parameters influencing the efficiency of small wind turbines, Journal of Wind Engineering and Industrial Aerodynamics, 2015, 146, 29 – 38, Impact Factor: 2.965.
  16. Kędzierski Piotr, Popławski Arkadiusz, Gieleta Roman, Morka Andrzej, Sławiński Grzegorz, Experimental and numerical investigation of fabric impact behavior, Composites Part B‑Engineering, 2015, 69, 452 – 459, Impact Factor: 4.858.
  17. Mazurkiewicz Łukasz, Małachowski Jerzy, Baranowski Paweł, Blast loading influence on load carrying capacity of I‑column, Engineering Structures, 2015, 104, 107 – 115, Impact Factor: 3.06.
  18. Barnat Wiesław, Numerical examination on the influence of headrest use on the body of a solidier in a vehicle loaded with 25 kg side load, Eksploatacja i Niezawodność – Maintenance and Reliability, 2015, 17, 4, Impact Factor: 1.296.
  19. Barnat Wiesław, Sokołowski Dariusz, Gieleta Roman, Bogusz Paweł, Numerical and experimental studies of material propertis of special – purpose material twaron T750, Fibres & Textiles in Eastern Europe, 2015, 23, 4(112), 33 – 38, Impact Factor: 0.757.
  20. Baranowski Paweł, Małachowski Jerzy, Niezgoda Tadeusz, Mazurkiewicz Łukasz, Dynamic behaviour of various fibre systems during impact interaction – numerical approach, Fibres & Textiles in Eastern Europe, 2015, 23, 6(114), 72 – 81, Impact Factor: 0.757
  21. Płatek P., Damaziak Krzysztof, Małachowski Jerzy, Kupidura P., Woźniak R., Zahor M., Numerical study of modular 5.56 mm standard assault rifle referring to dynamic characteristics, Defence Science Journal, 2015, 65, 6, 431 – 437, Impact Factor: 0.644.
  1. Baranowski Paweł, Gieleta Roman, Małachowski Jerzy, Damaziak Krzysztof, Mazurkiewicz Łukasz, Split Hopkinson pressure bar impulse experimental measurement with numerical validation, Metrology and Measurement Systems, 2014, 21, 1, 47 – 58, Impact Factor: 1.227.
  2. Baranowski Paweł, Damaziak Krzysztof, Małachowski Jerzy, Mazurkiewicz Łukasz, Polakowski Henryk, Piątkowski Tadeusz, Kastek Mariusz, Thermovision in the validation process of numerical simulation of braking, Metrology and Measurement Systems, 2014, 21, 2, 329 – 340, Impact Factor: 1.227.
  3. Monika Podwórna, Marian Klasztorny, Vertical vibrations of composite bridge / track structure / high-speed train systems. Part 1: Series-of-types of steel-concrete bridges, Bulletin of the Polish Academy of Sciences – Technical Sciences, 2014, 62(1), 165 – 179, Impact Factor: 1.323.
  4. Monika Podwórna, Marian Klasztorny, Vertical vibrations of composite bridge / track structure / high-speed train systems. Part 2: Physical and mathematical modelling, Bulletin of the Polish Academy of Sciences – Technical Sciences, 2014, 62, 1, 181 – 196, Impact Factor: 1.323.
  5. Norbert Pałka; Danuta Miedzińska, Detailed non-destructive evaluation of UHMWPE composites in the terahertz range, Optical And Quantum Electronics, 2014, Impact Factor: 1.088.
  6. Monika Podwórna, Marian Klasztorny, Vertical vibrations of composite bridge / track structure / high-speed train systems. Part 3: Deterministic and random vibrations of exemplary system, Bulletin of the Polish Academy of Sciences – Technical Sciences, 2014, 62, 2, 305 – 320, Impact Factor: 1.323.
  7. Krasoń Wiesław, Małachowski Jerzy, Field test and numerical studies of the scissors-AVLB type bridge, Bulletin of the Polish Academy of Sciences – Technical Sciences, 2014, 62, 1, 103 – 112, Impact Factor: 1.323.
  8. Barnat Wiesław, Environmental influences on propagation of explosive wave on the dynamic response of plate, Bulletin of the Polish Academy of Sciences – Technical Sciences, 2014, 62, 3, 423 – 429, Impact Factor: 1.323
  9. Barnat Wiesław, Experimental and numerical study of influence of incidence angle of shock wave created by explosive charge on the steel plate, Bulletin of the Polish Academy of Sciences – Technical Sciences, 2014, 62, 1, 151 – 163, Impact Factor: 1.323.
  10. Chabera P., Boczkowska Anna, Morka Andrzej, Niezgoda Tadeusz, Oziębło A., Witek A., Numerical and experimental study of armour system consisted of ceramic and ceramic- elastomer composites, Bulletin of the Polish Academy of Sciences – Technical Sciences, 2014, 62, 4, 853 – 859, Impact Factor: 1.323.
  11. Krasoń Wiesław, Niezgoda Tadeusz, FE numerical tests of railway wagon for intermodal transport according to PN-EU standards, Bulletin of the Polish Academy of Sciences – Technical Sciences, 2014, 62, 4, 843 – 851, Impact Factor: 1.323.
  12. Baranowski Paweł, Damaziak Krzysztof, Małachowski Jerzy, Mazurkiewicz Łukasz, Muszyński Artur, A child seat numerical model validation in the static and dynamic work conditions, Archives of Civil and Mechanical Engineering, 2014, Impact Factor: 2.562.
  13. Salamonowicz Zdzisław, Kotowski Michał, Półka Marzena, Barnat Wiesław, Oznaczanie charakterystyk wybuchowości obłoków pyłu przy wykorzystaniu modelowania numerycznego za pomocą CFD, Przemysl chemiczny, 2014, 93, 5, 692 – 696, Impact Factor: 0,399.
  14. Bukała Jakub, Małachowski Jerzy, Kwiatkowski Piotr, Finite element analysis of the percutaneous coronary intervention in a coronary bifurcation, Acta of Bioengineering and Biomechanics, 2014, 16, 4, 23 – 31, Impact Factor: 1.022.
  15. Baranowski Paweł, Janiszewski Jacek, Malachowski Jerzy, Study on computational methods applied to modelling of pulse shaper in split-Hopkinson bar, Archives of Mechanics, 2014, 66, 6, pp. 429 – 452, Impact Factor: 1.095.
  16. Barnat Wiesław, Sokołowski Dariusz, Gieleta Roman, Numerical and Experimental Research on Stab Resistance of a Body Armour Package, FIBRES & TEXTILES in Eastern Europe, 2014, 22, 6(108), 90 – 96, Impact Factor: 0.757.
  17. Kaczmarek Łukasz, Adamczyk-Cieślak Bogusława, Mizera Jarosław, Stegliński Mariusz, Kyzioł Karol, Miedzińska Danuta, Kołodziejczyk Łukasz, Szymański Witold, Kozanecki Marcin, Influence of chemical composition of Ti/TiC/a‑C:H coatings deposited on 7075 aluminum alloy on their selected mechanical properties, Surface & Coatings Technology, 2014, 261, pp. 304 – 310, Impact Factor: 906.